With the continuous increase of tablet computers in society, the sales of flat film are very hot. There are many flat films on the market at present, including soft films, explosion-proof films, tempered films, frosted films, etc., which makes people don’t know what to do when purchasing? And the biggest problem is that most people don’t. When applying a film, blistering often occurs, which makes people very distressed. In fact, screen film is not as difficult as everyone thinks, so the editor will tell you about the material of the film as well as the steps and methods of applying the film.
Materials of film
There are currently four main materials for film: pp material, pvc material, pet material, and arm material.
The film made of PP material: is relatively soft and has poor light transmittance. It cannot prevent scratches and wear. It can only prevent dust. Due to its poor effect, it is now basically abandoned by consumers. .
PVC film: relatively soft and easy to stick, but relatively thick and not very good in light transmission. And if you peel off the film, residual glue will be left on the phone screen, which will affect the appearance.
The film made of PET material: has high light transmittance, no adhesive residue after tearing off, and small bubbles in the middle of the film are not easy to appear. However, the high reflectivity of this film will cause users to not be able to see the words on the screen clearly, and it is also easy to leave fingerprints and other marks on the surface.
ARM material film: The surface of the film made of this material has been treated with the latest technology and is wear-resistant and scratch-resistant. At the same time, products made of this material have no bubbles after being applied, and have good light transmittance, and will not leave any traces after being peeled off. Relatively speaking, this kind of membrane has the best effect, but of course it is also the most expensive.
Preparation before applying the film
If you purchase non-customized film, you need to prepare scissors, ruler, pen, andFor non-woven fabrics, measure the film and device on a flat table and then cut it to fit your device screen. Cutting should be fast, accurate, and successful the first time, so that it looks beautiful.
If you purchase the original film that matches your device model, there is no need to cut it separately, but you need to choose a good room for the film, with good light, and the room should be clean and free of dust.
Applying film is a delicate job. You have to wash your hands and dry them to keep them clean and dry.
Steps for applying the film
First use the non-woven cloth included in the package to wipe off the dust on the surface of the screen (if there is no non-woven cloth for the bulk film, you can use lens cleaning paper or lens cleaning paper) glasses cloth instead).
There are three layers of film. Unlock the layer marked 1, face it towards the screen, align it with the screen and carefully stick it along the edge of the screen.
When doing the second step, that is, when applying the film, do not apply it all at once. You must push and empty the air under the film while applying it.
After everything is pasted, check whether there are any bubbles. If there are bubbles, you can use a scraper or credit card or bank card to scrape and push out the air under the film.
After the inspection is correct, you can tear off the protective film marked 2 on the film, and the film is now complete.
Everyone knows that the iPad has been launched, which has attracted people's attention to tablet computers. For a while, all major manufacturers have produced products of their own brands. tablet. People take great care of their tablets when using them, so people will put a protective film on their tablets. But when people buy flat film, they don't know which type of product to buy. Through the film materials and film application methods introduced by the editor, I hope it can give you some help.