Reminder:
Be sure to back up your data before restoring the system;
Please connect the power supply during the entire recovery process;
The entire recovery process takes about 1.5 hours.
Specific recovery steps:
1. Put the system DVD disc into the optical drive (the laptop needs to be turned on first).
2. Restart the laptop and press the
3. Select a partition item and click [Next]. Partition project:
1) Only restore Windows to the first partition:
This project will only Delete the contents of the first partition, leave the system to the other partitions, and install the system on the "C" drive.
2) Recover Windows to the entire hard drive:
This project will overwrite all the data in your hard drive and restore the entire hard drive to a single partition named "C".
3) Restore Windows to a hard drive with two partitions
This project will restore the entire hard drive to factory settings. Re-partition the hard drive into two partitions. The first partition named "C" has a capacity of about 30% of the hard drive capacity, and the second partition named "D" has a capacity of about 70% of the hard drive capacity, and install the system On the "C" drive. (" C "disk and"D "The ratio of disk capacity will vary depending on the model)
4) Please follow the on-screen instructions to complete the recovery process.
The following interface appears, indicating that the system is being restored:
5. After the recovery is completed, the optical drive will pop up automatically, prompting you to insert the driver CD. If there is no driver CD, just shut down and restart.
