When it comes to computers, we have to talk about Shenzhou Xiaoben. Shenzhou Xiaoben is a domestic brand. Its main product is notebooks for morning office use. It is not only small in size, but also easy to carry and not too heavy. It is heavy, but its computer is prone to problems, so we need to disassemble it for repair. However, the disassembly of Shenzhou Computer is not that simple. How to disassemble it well? Let me introduce to you the disassembly of Shenzhou Elegant q130b. Tutorial.
Preparation for disassembly: scraper, screwdriver magnet (used to absorb screws to prevent them from falling), storage box (used to store disassembled parts) widget).
First step: First, we cut off the power supply to the computer, and then remove the battery from the back of the Shenzhou Elegant q130b notebook.
Step 2: Then we use the corresponding screwdriver to remove several fixed screws from the back of the notebook, use a ferromagnetic magnet to absorb the screws, and set them aside.
Step 3: After removing the screws on the back, we open the back cover. Be sure to pay attention to the cables and not to break them when removing the back cover.
Step 4: After removing the back cover, we will find that there is an outer shell inside. Let’s not rush. First, remove the memory module on the side. Remove the processor and remove the other fixing screws.
Step 5: After removing the screws inside, we remove the inner shell and carefully observe the wiring.
Step 6: Find the screws that secure the keyboard and remove them.
Step 7: When disassembling the keyboard, pay attention. Not only are there screws, but also hooks. Use a scraper to remove the keyboard. Pull it open slowly, don't damage the hook, otherwise it will be inconvenient to install later.
Step 8: After taking off the keyboard, we need to remove the display slowly with a scraper. Remove the display cable fixed to the motherboard. It should be noted that there are two cables for the backlight panel and the display. Do not remove just one and then the screen. Be sure to remove both before taking the screen. .
Step 9: Then we remove the screws that secure the optical drive and cooling fan, and then we are done.
You must be careful when disassembling the computer, otherwise it will be very troublesome if the components are damaged. If you are not a professional, do not disassemble it casually. If you have a broken machine at home, you can practice it Practice and dismantle the machine you need to repair. Of course, the premise is that you can repair it. Otherwise, it is better not to take risks. It is safer to find after-sales service. Of course, if you want to clean up the dust or replace parts, read carefully. The following disassembly tutorial will generally not cause any problems if you disassemble it carefully. Okay, that’s it for my introduction. I hope it can help you.