To install dual systems using a USB disk, you first need to make a USB boot disk, and then use the USB boot method to set the startup mode, so as to guide the computer to start the PE system before further installing the system. The following is used HP Computer teaches you how to install win10win8 dual system. Let’s take a look at how to install it. < /p>
2. Select the win10 image in the u start pe one-click installation tool, use the c drive as the system disk, and install it in the c drive,
3. The program reminds you of the restore operation, click OK to restore, and restart after the restore.
4. The program will then install itself. After the installation is complete, you only need to set the corresponding parameters.
5. Repeat steps 1-2 untilGo to the installation tool, select the win8 image, and install it on a drive other than the c drive,
6. When the program reminds you of the restore operation, do not check the restart after completion option ,
7. Return to the PE desktop and click the Repair System Boot Tool to repair the system.
8. Restart the computer after boot repair, select and click win8 system to complete the win8 system installation.
The USB boot method only includes these important steps. The specific process still requires the user to operate it himself to understand it better.